3D printing technology is now bringing back the use of 3D models of process units. Having a 3D model has many benefits, including a more than ten-fold improvement in efficiency in doing model reviews, versus reviewing the model on the computer. In the past, 3D models were created by assembling plastic pieces, which was very […]
Settlement of a pipe support foundation is usually not a big deal to assess. A local piping flexibility model will reveal if the settled support keeps the pipe bending stresses within the allowable codes and, if the bending stresses are unacceptable, modifying the support and monitor periodically for further settlement is normally a quite manageable […]
3D printing technology is now bringing back the use of 3D models of process units. Having a 3D model has many benefits, including a more than ten-fold improvement in efficiency in doing model reviews, versus reviewing the model on the computer. In the past, 3D models were created by assembling plastic pieces, which was very […]
The safe operation, maintenance and reliability of roofs in large tanks, does require special considerations in their design, construction and installation practices. Over the past 60 plus years, thousands of tanks with Fixed Roofs with internal Covers, and Floating Roofs, have been used to store Crude Oil and Middle Distillates. Refiners derived significant advantage through […]
Turnarounds (TA) in refining units are executed periodically, on a planned basis, to meet multiple objectives, such as regulatory compliance, process reliability improvement, and equipment inspection and/or repairs. In a competitive business environment, managing TA events in a cost effective manner is a well-recognized challenge. Key Step – Planning Development of a comprehensive Work Scope for […]
Many of the tourist spots around the world have panhandlers. Some of the more creative ones stand on street corners advertising that they will tell you where you got your shoes, for a dollar. Of course it turns out that “you got your shoes” at the corner of Bourbon and St. Peters – or wherever […]
